How to Make Homemade RV Awning Cleaner – Complete Guide
RV awning is served several purposes. It is indeed a great feature to use on your RV. Door awnings or window awnings can protect the roof of your RV from debris.
Instead of buying RV Awning Cleaner, it is far better to use a homemade RV Awning cleaner.
Homemade RV awning cleaner can be a good option if you need an RV Awning cleaner. Making an RV Awning cleaner is not that difficult. Once you get familiar with it, it won’t be so difficult at all.
In this article, we will present the process shortly in an easily understandable way.
How to Make Homemade RV Awning Cleaner
Making an RV Awning Cleaner is not that difficult. Firstly you will need some tools. So you will have to manage them and bring them together to start making an RV Awning Cleaner.
Required to Make Homemade RV Awning Cleaner
You will need six tools, and they are:
- Vinegar (1 or 2 cups)
- Baking Soda (2 tablespoons)
- Oil (Eucalyptus essential)
- Funnel (Small size)
- Spray Bottle
- Tea Tree Essential Oil
After bringing these together, you should be ready to start working. You will have to follow some procedures step by step to ensure the making. These steps are:
Step 1
At the very beginning, open the spray bottle. Then you will have to pour some vinegar into the bottle. For that, in the first place, a tinny funnel right on the opening of the bottle and pour nearly half a cup white vinegar into the bottle. Make sure that you haven’t poured too much vinegar.
Step 2
Add two tablespoons of baking soda with the vinegar. Like step 1, here, you will have to be careful as well. Because you will have to mix them thoroughly. By doing that, you will notice that some foam being produced from the reaction.
It may overflow the spray bottle. Before adding some more vinegar, wait for the foam and let it be subsided, and then you will have to stir the mixture.
Step 3
Now it’s time you add some essential oils in your mixture. Also, mix ten droplets of tea tree essential oils along with ten droplets of eucalyptus. Stand still and observe the mixture effervesces.
While introducing the droplets, you should tone down so that you can prevent foam from tipping over. Now, wait for the foaming to be subsided.
Step 3
In step 4, you will have to mix water. Make sure that the water is pure and clean. If you don’t want any more reaction, then you will have to make sure about the pureness of your water. Because any impurities in the water can lead you to that.
You should know that these reactions are not that good for your cleaning agent. Because it can affect the strength of your cleaning agent. Keep some little space at the upper side of the bottle as there is enough room for shaking.
Step 4
Now, it’s time to shake thoroughly. Make sure that the bottle is sealed and then start shaking it. Try to apply all the force you can at a time.
Do it again and again with a very little break. After that, you are done. Your RV Awning Cleaner is ready to be used.
Cleaning Your Camper Awning – Step by Step
The main intention of writing this article is to make you understood certain things easily. And while doing that, we have found that explaining the process of cleaning your camper awning would be much easier if we bring that step by step.
Cleaning Your Camper Awning – Step by Step
So, here we go. We are going to explain the ways in 7 different steps, and if you notice them clearly, it will be seemed a lot easier for you to understand.
Step 1
At first, open your awning and keep it lower as much as possible. Because it would be problematic for you to reach when it is set in a high position. Though you can use a step tool or even long brush, let’s just stick to the easiest plan.
Step 2
Now you will have to make your cleaning solution ready. You can prepare any of these 3 solutions mentioned below.
DIY Solutions
You can easily create a homemade cleaning solution with dish soap and water. Mostly, bleach is used in such a purpose. The best thing to do is to check the user manual before starting the proceedings.
There are two groups between manufacturers as some of them prefer water and bleach, and others are opposite in their opinions.
Store-Bought Solutions
Valterra’s RV Awning Cleaner #V88542 can be bought off as a solution. It is engineered in such a way that it can remove dirt, tree sap, mold, and mildew from your awning.
However, if you are up for the store-bought solution, then make sure that it is designed mainly for awning fabrics. You have to avoid solutions that are caustic, oil-based, or abrasive.
Tree Sap Solutions
You can mainly go for Tree Tap Solutions, especially when you have a woven acrylic fabric.
Step 3
Clean away all leaves and debris. After that, rinse both sides of the fabric, use a hose for that as it will remove any loose dirt.
Step 4
Now, you will have to cover it with your cleaning solution. You are allowed to use a brush or a pressure washer. Recheck whether you have covered the top and bottom of your car awning. Roll it up and wait 5 minutes.
Step 5
Now expand the awning and wipe the fabric gently. In the case of wiping, you can use a brush or a sponge. Remember, don’t rub it instead of wiping it.
Step 6
Use your hose or pressure washer to rinse the awning thoroughly. Remove all the traces of your cleaning solution, and many chemicals can damage the fabric.
Step 7
Before storing, you will have to allow the awning to be completely air-dried.
Conclusion
A Homemade RV Awning Cleaner is a very important thing for your RV as it works as the protector of your RV. It protects your RV from the sun and so many other things. It saves your RV’s roof from debris.
So. By all means, it is essential for your RV. We found making a homemade RV Awning cleaner is way too easy. We have tried our best to share our thoughts as clearly as possible. May this one helps you to make an RV Awning cleaner by yourself?
